This kit replaces the original Axle Retainers from Lancair on the 235, 320, 360, and Legacy models which have self-centering struts.  It is designed to fit with any of the original Lancair or O’Day Design forks for these models.  These retainers are only compatible with certain axles.  The later GM38 Axle Bushings or O’Day Design 700-0068 Axle Bushing which features axial retention (large flat) must be used.  It does not fit with the early GM38 Axle Bushings which are intended only to prevent rotation of the axle (small flat).

These retainers have been Type III (hard) anodized which improves their durably.  This makes it less prone to scratching, denting, and galling from interactions with the gear door and runway debris.

This kit comes with retainers for each side of the fork and 4X NAS517-3-1 countersunk screws.  These are countersunk to prevent hang-ups with the door.  High strength screws are used to prevent cam out with the screwdriver.

****Screws must be installed with Loctite 242 (blue) or equivalent thread-locker****

700-0091 REV 0 – 235-320-360-LEGACY AXLE INSTALLATION

This product is designed to fit the Lancair 235, 320, 360, and Legacy models.