This seal kit is compatible with Lancair Legacy main gear struts produced by Esco.  It is the most complete kit available including:

• Qty 2 – Housing & Piston O-Rings 2-1/4″ OD 1/8″ W (Upgraded Viton)
• Qty 1 – Plug O-Ring 1-1/8″ OD 1/8″ W (Upgraded Viton)
• Qty 1 – Valve Sealing Washer
• Qty 10 – Bonded Washer
• Qty 1 – Rod Seal
• Qty 1 – Rod Dust Wiper
• Qty 13IN – Piston Bearing Strip
• Qty 1 – Valve Core, 4000psi

This kit services one (1) strut.  Additional tools and materials are required, refer to the installation instructions.

Installation instructions can be downloaded below, these will be updated periodically and are provided for reference only.

700-0067 REV A – LEGACY MAIN STRUT INSTRUCTIONS

Attention:  The Viton O-rings enhance chemical and environmental resistance, however may not be suitable in extremely low temperatures.  If you are operating below -20F or do not wish to use this alternate material reach out to us and we will instead supply the original nitrile o-rings with your kit.

This product is designed to fit the Lancair Legacy models.  Since there are a number of strut iterations it cannot be guaranteed to fit, or be complete for all Legacy main struts.  Refer to the disclaimer in the manual before purchasing.